Fiber laser cutting machine operating procedures
(I) Laser cutting machine safety regulations
1. Strictly follow the laser start-up procedure to start the laser cutter, adjust the light, and try to cut the workpiece.
2. The operator must be trained, familiar with the cypcut laser cutting machine software, laser cutting equipment structure, performance, and master the relevant knowledge of the operating system.
3. Wear labor protection equipment in accordance with the regulations, and wear protective glasses near the cnc laser cutting machine.
4. When the cnc laser cutting equipment is started, the operator shall not leave the post without authorization. If it is really necessary to leave, laser machine should be stopped, and the emergency stop button should be turned off to enable it.
5. Turn off the metal laser cutting machine or shutter when not processing.
6. Keep the lasers, laser heads, machine tools and surrounding sites in an orderly and oil-free manner. Workpieces, materials, and waste are placed neatly in accordance with regulations.
7. The use of gas tanks should strictly abide by the gas tank supervision regulations. When opening the gas tank, the operator must stand to the side of the gas outlet.
8. During maintenance, high-voltage regulations must be strictly followed. Turn off the power and check the cause of the equipment failure.
9. Fire safety regulations must be strictly followed. Keep fire extinguishers within easy reach.
10. Do not process a material without knowing whether it can be irradiated or cut with a laser to avoid the potential danger of fumes and vapors.
11. Be careful when loading and unloading materials to ensure personal safety.
(2)Turn on cnc laser cutter steps:
1. The total power supply. The regulated power supply starts. (Check the three-phase voltage balance)
2. Open the cutting gas main valve. (Check whether N2 and 02 are leaking)
3. Turn on the metal laser cutter water cooler. Check to see if the water temperature and pressure are normal. (Laser water temperature 25°C, fiber optic and cutting head water temperature 28℃)
4. Start the laser cut machine power supply (key switch)
5. Start the laser. Laser power is on. (the indicator light is green)
6. The operating laser cutter software system starts, and the machine tool returns to zero. The laser cutting head sensor is calibrated automatically or manually, and the MDI function is executed . (When the cnc laser machine is turned on every day, the cnc laser machine must return to zero. The fiber laser cutting head sensor is calibrated automatically or manually, and the MDI function is executed)
7. According to the corresponding laser cutting material, adjust the focus position and change the laser cutting nozzle.
8. Manually test the gas N2 and O2 to confirm whether the gas pressure is normal.
9. Confirm whether the laser cutting program is consistent with the material.
10. In the (automatic interface), call the laser cutting processing program and load the laser cutting parameters.
11. Start the program, and the red light will go to the border. Check to see if the laser cutting program is in the sheet range.
12. Start the program and start processing. In the process of processing, pay attention to the cutting situation at any time. If the fiber laser cutting head may collide or the path is hollow, it should be suspended immediately.After eliminating the fault factors, you can continue to cut。
(3). Shutdown sequence
as opposed to turn on machine
We Qiaolian Laser is a professional laser cutting machine manufacturers.Our products include single table laser cutting machine，Full enclosed fiber laser cutting machine, exchange table laser cutting machine, sheet tube laser cutting machine, professional tube laser cutting machine, large format gantry laser cutting machine. Laser power include 1kw/1.5kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw/40kw.Our products are exported to the United States, Mexico, Germany, Hungary, Poland, Russia, Kazakhstan, Spain, India, South Korea, Malaysia, Singapore, Indonesia, Taiwan and other countries and regions.
We Qiaolian laser technology co,.ltd is a professional manufacturer of laser cutting machine.Our products include single table laser cutting machine，Full enclosed laser cutting machine, sheet & tube laser cutting machine, professional pipe laser cutting machine, large format gantry laser cutting machine etc. Laser power:1kw /1.5kw /2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw/40kw
Our products are exported to the United States, Mexico, Germany, Hungary, Poland, Russia, Kazakhstan, Spain, India, South Korea, Malaysia, Singapore, Indonesia, Taiwan and other countries and regions.
how to use a laser cutting machine